Load data for .30 PICRA + .308 | 150gr | Sierra SPFN 30-30

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Sierra SPFN 30-30
Manufacturer SKU:	2000
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B5874_C311
Last updated:	2026-01-21

Load data for 44 loads in caliber .30 PICRA with .308 | 150gr | Sierra SPFN 30-30 bullet and 22 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	36245	89%	**89	100%
ADI APS 350	<<locked>>	62%	36158	89%	**40	100%
Accurate 4100	<<locked>>	72%	35940	89%	**58	91%
[Accurate No. 11 FS]*	<<locked>>	81%	35969	89%	**81	84%
Alliant 2400	<<locked>>	68%	35766	88%	**68	94%
Alliant BLUE DOT	<<locked>>	71%	36114	89%	**42	99%
Baschieri & Pellagri 102 Pistol	<<locked>>	74%	36129	89%	**15	100%
[Hodgdon H110]*	<<locked>>	76%	35882	88%	**85	88%
Hodgdon LilGun	<<locked>>	77%	36245	89%	**17	94%
Maxam CSB 1	<<locked>>	63%	35665	88%	**38	100%
Ramshot Enforcer	<<locked>>	69%	36187	89%	**68	95%
ReloadSwiss RS 14	<<locked>>	96%	24990	62%	**1	100%
ReloadSwiss RS 30	<<locked>>	93%	36216	89%	**17	91%
SNPE Vectan A0	<<locked>>	63%	36013	89%	**81	100%
SNPE Vectan BA6 1/2	<<locked>>	94%	35911	88%	**75	97%
SNPE Vectan BA7 1/2	<<locked>>	66%	35447	87%	**34	100%
[Somchem S265]*	<<locked>>	84%	36129	89%	**52	87%
Vihtavuori 3N38	<<locked>>	67%	35621	88%	**06	100%
Vihtavuori N105	<<locked>>	70%	35491	87%	**22	100%
Vihtavuori N110	<<locked>>	86%	36245	89%	**91	95%
Vihtavuori N32C Tin Star	<<locked>>	78%	36071	89%	**50	100%
[Winchester 296]*	<<locked>>	76%	36332	89%	**14	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26919	66%	**45	100%
ADI APS 350	<<locked>>	61%	34969	86%	**27	100%
[Accurate 4100]*	<<locked>>	61%	25382	62%	**88	85%
[Accurate No. 11 FS]*	<<locked>>	75%	29791	73%	**70	80%
Alliant 2400	<<locked>>	61%	28413	70%	**37	90%
Alliant BLUE DOT	<<locked>>	61%	26731	66%	**94	96%
Baschieri & Pellagri 102 Pistol	<<locked>>	61%	26469	65%	**4	100%
[Hodgdon H110]*	<<locked>>	65%	25193	62%	**07	81%
[Hodgdon LilGun]*	<<locked>>	61%	20334	50%	**32	83%
Maxam CSB 1	<<locked>>	61%	33373	82%	**12	100%
Ramshot Enforcer	<<locked>>	61%	28036	69%	**47	91%
ReloadSwiss RS 14	<<locked>>	89%	22437	55%	**9	100%
[ReloadSwiss RS 30]*	<<locked>>	76%	22742	56%	**65	80%
SNPE Vectan A0	<<locked>>	61%	33794	83%	**55	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14620	36%	**8	80%
SNPE Vectan BA7 1/2	<<locked>>	61%	31691	78%	**81	100%
[Somchem S265]*	<<locked>>	71%	25498	63%	**68	80%
Vihtavuori 3N38	<<locked>>	61%	29341	72%	**14	99%
Vihtavuori N105	<<locked>>	61%	26992	66%	**01	100%
[Vihtavuori N110]*	<<locked>>	61%	17405	43%	**27	81%
Vihtavuori N32C Tin Star	<<locked>>	63%	26107	64%	**2	100%
[Winchester 296]*	<<locked>>	70%	29356	72%	**99	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data